partners
Modular design
| The base of the Cell mobility is its modular design. Cell consist of five modules, each with its own role: residential unit (1); bedroom in the attic (2); sanitary unit with shower and toilet (3); technological unit with kitchen (4) where heating and photovoltaic system and rainwater collection system is situated; and the attic of the technological unit (5) with a hot air solar heating system. |
 |
 |
 |
 |
 |
|
 |
 |
|
 |
 |
|
 |
 |
Integration of building services
| Each of the modules was equipped with systems of building installations before transporting on the final location. This enables "plug-and-play" operation of all systems, after the installation of residential units on the final location. Installations between modules are equipped with technology of "quick connectors". Only the largest elements were transferred separately, for example rainwater tank and batteries of the photovoltaic system. |
Connecting modules
| The modules are designed to be sealed in one plane with each other. In our case, we used a Plama-pur GUMAFLEX panels with thickness of 9 mm. Tightness of the adjacent modules joints was tested by "Blower Door" building tightness test method. We proved that tightness meets the requirements of passive buildings. The results can be found in: >monitoring > reports. |
